Brake Lever Pivot Bolt
5 posters
CB500 Club forum :: Forum :: Workshop
Page 1 of 1
Brake Lever Pivot Bolt
Evening All
Being a bit of a tool I dropped my bike. Just washed, wet centre stand, wet boot, over it went. It sustained a bit of damage but nothing too drastic.The main problem I'm having is that the pivot/shoulder bolt for the brake lever has snapped. I can't find one on ebay, wemoto or any of the other usual suspects.
Does anyone know where I could find one?
Thanks & Merry Christmas!
Being a bit of a tool I dropped my bike. Just washed, wet centre stand, wet boot, over it went. It sustained a bit of damage but nothing too drastic.The main problem I'm having is that the pivot/shoulder bolt for the brake lever has snapped. I can't find one on ebay, wemoto or any of the other usual suspects.
Does anyone know where I could find one?
Thanks & Merry Christmas!
Scorgie88- Godly
- Posts : 60
Location : Somerset
Re: Brake Lever Pivot Bolt
Nissin or Brembo ?
Beresford- the 900
- Posts : 1873
Location : not that far from Kirkistown
Re: Brake Lever Pivot Bolt
Brembo, just a thought, is it the same as the one on the clutch?
Scorgie88- Godly
- Posts : 60
Location : Somerset
Re: Brake Lever Pivot Bolt
Is that part 12 from here?
If lings say they have it 'in stock' that suggests that you can probably order it (at that price) from any Honda dealer - if you get it through the dealer you won't have to pay the postage (assuming you have a local dealer).
If lings say they have it 'in stock' that suggests that you can probably order it (at that price) from any Honda dealer - if you get it through the dealer you won't have to pay the postage (assuming you have a local dealer).
eternally_troubled- the 900
-
Posts : 4209
Location : 'ere be fens. (near Cambridge)
Re: Brake Lever Pivot Bolt
Yeah that's the one. I'll need 12 & 15 as part of 12 is pretty firmly stuck in 15. Thanks for your help, I'll give them a buzz in the new year.
Scorgie88- Godly
- Posts : 60
Location : Somerset
Re: Brake Lever Pivot Bolt
It's a bit rich that the price for one flange nut is over a fiver. That would buy 50 stainless ones on ebay I think.
I just checked that statement and found 50 stainless flange nuts @ £3.50 delivered!!!
I just checked that statement and found 50 stainless flange nuts @ £3.50 delivered!!!
Beresford- the 900
- Posts : 1873
Location : not that far from Kirkistown
Re: Brake Lever Pivot Bolt
Part 12 is threaded into the m/c and then the thread also goes out of the bottom where the nut goes. So it's held in within 2 places.
Jameshambleton- the 900
- Posts : 2969
Location : Bedale, North Yorkshire
Re: Brake Lever Pivot Bolt
MSP List it, a bit cheaper than direct from Honda.
Bigbill55- Newbie
- Posts : 8
Similar topics
» rear brake pedal pivot bolt
» Side stand pivot bolt
» Brake lever (Handle)
» Swing arm pivot bolt caps
» Brake lever
» Side stand pivot bolt
» Brake lever (Handle)
» Swing arm pivot bolt caps
» Brake lever
CB500 Club forum :: Forum :: Workshop
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum