CB500 Club forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

cb500 2000 model

2 posters

Go down

cb500 2000 model Empty cb500 2000 model

Post by joe mc donald Sat 27 Nov 2021, 6:43 pm

Can someone tell me how the devil i can get the airbox out of my bike as i have a leak at the carbs and believe it is the feed hose but can't get in there to repair it. Also one carb seems to have some type of Ventura coming out of the rear the tap side is that right. This old bike is driving me nuts.
                              Joe.
joe mc donald
joe mc donald
Running out of unique names
Running out of unique names

Posts : 181

Back to top Go down

cb500 2000 model Empty Re: cb500 2000 model

Post by Al1040 Sun 28 Nov 2021, 4:43 pm

You have to remove the carbs first, they take some wrestling out with the R/H carbs being the tightest.
Pulling the airbox back with rope / bungee will help, It then just lifts out with one drain at the bottom if I remember correctly.
The carbs do have a bellmouth on then if that is what you are talking about

cb500 2000 model 20210816
Al1040
Al1040
Laser Shark
Laser Shark

Posts : 191
Location : Preston

Back to top Go down

cb500 2000 model Empty CB500 cARBS

Post by joe mc donald Mon 29 Nov 2021, 1:47 pm

Al1040 wrote:You have to remove the carbs first, they take some wrestling out with the R/H carbs being the tightest.
Pulling the airbox back with rope / bungee will help, It then just lifts out with one drain at the bottom if I remember correctly.
The carbs do have a bellmouth on then if that is what you are talking about
Al1040
Great thankyou for that. On carbs the bell mouth on the left seems to be jammed out and the right is flush or missing i can't tell. The sticking one is on the clutch side.
              Regards
                    Joe.
cb500 2000 model 20210816
joe mc donald
joe mc donald
Running out of unique names
Running out of unique names

Posts : 181

Back to top Go down

cb500 2000 model Empty Re: cb500 2000 model

Post by Al1040 Tue 30 Nov 2021, 9:59 am

Probably even more reason to get the carbs off to have a look. My L/H carb was seized solid Sad
Al1040
Al1040
Laser Shark
Laser Shark

Posts : 191
Location : Preston

Back to top Go down

cb500 2000 model Empty Re: cb500 2000 model

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum