clutch overhaul

hello everybody,

any recommendation on suppliers, outside UK, for clutch overhaul spare parts ?
I don't want to deal with taxes etc.

thank you,
keep and ride safe !

surflex.it

If looking for OEM
https://www.cmsnl.com/honda-cb500-1997-v-italy_model1584/partslist/E__0600.html

Burudi hello,
surflex has a huge amount of choices, but not for cb500
is there any other model that they share the same clutch, so to look for it ? 

AI1040 hello,
this will be my second overhaul, I'm looking to exchange the thrust washer also (the most inner), any idea where to find such ?

Not sure it helps much, but they have some in the states
https://www.partzilla.com/product/honda/90458-MY5-850
So must be fitted to other bikes as the 500 was not imported over there.
I will try to find out which ones

Also fitted on:
CBF500 2004 (4) ENGLAND
CBF500 2004 (4) EUROPEAN DIRECT SALES
CBF500 2004 (4) EUROPEAN DIRECT SALES / 3ED
CBF500 2004 (4) FRANCE / CMF
CBF500 2004 (4) IRELAND
CBF500 2006 (6) ENGLAND
CBF500 2006 (6) EUROPEAN DIRECT SALES
CBF500 2006 (6) EUROPEAN DIRECT SALES / 3ED 25K
CBF500 2006 (6) FRANCE / CMF
CBF500 2006 (6) IRELAND
CBF500A 2004 (4) ENGLAND / ABS
CBF500A 2004 (4) EUROPEAN DIRECT SALES / 3ED ABS
CBF500A 2004 (4) EUROPEAN DIRECT SALES / ABS
CBF500A 2004 (4) FRANCE / ABS CMF
CBF500A 2004 (4) IRELAND / ABS
CBF500A 2006 (6) ENGLAND / ABS
CBF500A 2006 (6) EUROPEAN DIRECT SALES / 3ED ABS 25K
CBF500A 2006 (6) EUROPEAN DIRECT SALES / ABS
CBF500A 2006 (6) FRANCE / ABS CMF
CBF500A 2006 (6) IRELAND / ABS

Looks like they have one here:
https://www.wemoto.com/oem?q=90458-MY5-850&partsfilter=oem
I would be happy to get for you and post over if that makes it easier

hey man, this will be great !
SO THANK FULL.
please show me how to proceed ??

So, none of the UK suppliers have this in stock and it appears to be discontinued by Honda, so it could only be NOS (new old stock) and or get one made (22*45.8*0..
I have found this https://zsf-motorrad.de/shopping_cart.php?products_id=11290&
You may want to try them as they may have NOS.

thank you Allan !!

You are very welcome, good luck with the hunt.

A little update on this, I have spoken to an engine builder not far from me who prepares CB500 engines for racing to see if he had any(https://www.bencoyleracing.co.uk/cb-500-engine-tuning) and he did say that he has very rarely ever changed the thrust bearing. You could well be fine as long as the thickness is within spec at 0.8

https://partsrepublik.com/en/moto/honda/cbf500-2007/clutch

According to the website that I quote, it seems that said washer is available in 2 sizes:

reference 18
90458MY5850
washer, thrust, 22x45.8x0.8

ref19
90554700000
washer, thrust, 20mm

Try 
Dave Silver spares. He deals with loads of obsolete honda parts.

Thank you all !!!

after all these instructions, I think that I must managed this issue !

Or, as ~10 years & ~80000Km ago, just change the friction discs...
But I said to myself, that opening it this time, change some simple items also, the springs, this specific washer etc. open it, check/measure, order, WAIT for delivery, replace, close it.
From the other side, I don't want to open it and wait for parts, I keep the bike ready and ride all year round.

Just came back from a whole day ride, too cold on the mountains this time of the year.

My endless dilemma ... open and wait, or order and then open...

Andy... I did check with DSS, unfortunately he did not have any, I put a notification on just in case they get some in.

Panagiotis...Order then open at least you will know exactly what you are changing.

Tomorrow I'll check with partsrepublik for their #19 item, I already have ordered the rest of the parts I suppose I need to them, 
For the time being they have everything I need except the 22116MY5600 bushing (and the thrust washer) which I found in a Polish site
 https://motogar.pl/sklep/czesci-honda/13611-tuleja-kosza-sprzeglowego-honda-cb-500-cbf-500-oem-22116my5600-sklep.html

I am looking for the thrust washer because it's price is funny compared with the rest of the sum, and since I have to open it, I'll change it if is bellow 0.8mm