Stainless engine mounting bolts and alloy spacers

I believe the hardest part will be getting the old ones out

Hi Andy, Mine arrived today. Thank you. :-)

I can confirm that the rear engine mounting bolt is also the correct length for the oe Honda crash bars on the naked version of our bike.

Hi Andy could I order a set of theses please

Mad_Taffy_500 wrote:Hi Andy could I order a set of theses please

Sure,  which model is it for? Naked or faired model?

Naked

Hi Andy,
Are you still making these sets??  I am still trying to remove my front bolt but I am sure it will be scrap when finished. Might as well do the whole set in one go.

I have a faired 2003 bike with crash bars - is this a problem.

Please PM me with details of cost and payment methods and I will sort.

Many thanks
Peter

Hi Peter,
Yes I still do them. I'll work out the cost and let you know tomorrow. I'll have to check what stock I have.

Hi Andy I'm interested to know the price too. 

Thanks,

G

Due to the unfortunate reality that everything is getting more and more expensive these days the prices for me to make these has had to rise accordingly I'm afraid guys.
A set for the 's' model is now £35 and the naked models are now £40.
That is posted to UK mainland.

Hi Andy

Thanks for the prompt reply. Can I order a set for my 2003 faired model (the s model I believe - haven't had it long)  It also has some crash bars fitted but don't know if that makes a difference to the length of the front bolt!

Let me know how I can pay you please i.e. paypal, check or whatever,

Cheers

Peter

gillers50 wrote:Hi Andy

Thanks for the prompt reply. Can I order a set for my 2003 faired model (the s model I believe - haven't had it long)  It also has some crash bars fitted but don't know if that makes a difference to the length of the front bolt!

Let me know how I can pay you please i.e. paypal, check or whatever,

Cheers

Peter

No problem Peter,
I'll do the front bolt 10mm longer than usual then to allow for the crash bars.
Paypal is the easiest way,

a.carwardine@gmail.com  is the place to send it.

For some reason I couldn't PM you.

Thanks Andy.

Haven't been on the forum long so my PM bit is probably not set up - my fault.

However, I have sent you £35 via paypal and confirmed sent.

Address is: 

Many thanks

Peter

No problem Peter,
I'll get onto it as soon as I can. 
Thanks.

ANDYC wrote:Due to the unfortunate reality that everything is getting more and more expensive these days the prices for me to make these has had to rise accordingly I'm afraid guys.
A set for the 's' model is now £35 and the naked models are now £40.
That is posted to UK mainland.

I wouldn't worry, your prices are quite fair - the original parts (i.e. not stainless!) for a naked are £30 from Lings *without* the postage....

gillers50 wrote:Thanks Andy.

Haven't been on the forum long so my PM bit is probably not set up - my fault.

However, I have sent you £35 via paypal and confirmed sent.

Address is: 

Many thanks

Peter

Hi Peter,
Could you PM me your address please, so I can get them off to you tomorrow morning.
I know you did supply it but James deleted it for security reasons.

Hi Andy,
Could you do me an engine bolt and spacers for a 'naked' model please? If it's ok, i'll pm you my details.
Thanks in advance.

No problem, I'll get onto it as soon as I can.

This thread still active?

I'll be looking for a set of bolts&spacers in the near future, and why not do it right the first time?

It is still active and available.

Hi Andy, are you still making these up? I may be looking for a set for a naked bike if I can remove the originals over the next few days

Many thanks

Hi, yes I can still make them.

great will drop you a message, if successful.

No worries.

http://www.rayzamotos.com/acc.htm