Breaking a 95 (drum ) model

Hi all,

bought a 1995 model as I needed a few parts for my track project, and I'm breaking the rest of the bike.
The tank, radiator and starter motor have gone(they were the main parts I needed)
The wheels have almost new Bridgestone S20's on them.(110-70-17 and 140-70-17)  £100 the pair  ****SOLD****
https://i.servimg.com/u/f18/17/73/27/78/012_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/013_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/014_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/015_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/017_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/018_210.jpg
The Carbon fibre can is pretty loud but useable, no idea of make. A few scratches.  £35  ***SOLD***
https://i.servimg.com/u/f18/17/73/27/78/019_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/020_210.jpg
Engine is good at 33K (apart from the usual exhaust stud issue)
Side panels are both good.   £25 each****SOLD****
https://i.servimg.com/u/f18/17/73/27/78/004_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/005_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/007_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/008_210.jpg
Seat is good.  £50         ****SOLD****
https://i.servimg.com/u/f18/17/73/27/78/001_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/002_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/003_210.jpg
Speedo drive.   £15
https://i.servimg.com/u/f18/17/73/27/78/026_210.jpg
https://i.servimg.com/u/f18/17/73/27/78/027_210.jpg
Front wheel spindle and spacer  £10
https://i.servimg.com/u/f18/17/73/27/78/025_210.jpg

most other stuff available.

Prices are all plus postage, or can be collected from the Windsor area.

What are the forks like mate? Just the stanchions and sliders, I wouldn't need the yokes. Got to do my fork seals on mine, and the stanchions are pretty badly pitted, so looking for a pair to strip and rebuild ready to do a quick swap over, rather than have my bike in bits for ages...

Cheers, Glen.

HI,
I'll take the endcan. £42 posted?

muttley1

GlenAnderson wrote:What are the forks like mate? Just the stanchions and sliders, I wouldn't need the yokes. Got to do my fork seals on mine, and the stanchions are pretty badly pitted, so looking for a pair to strip and rebuild ready to do a quick swap over, rather than have my bike in bits for ages...

Cheers, Glen.

I'll clean them and see what they're like today.

muttley1 wrote:HI,
I'll take the endcan. £42 posted?

muttley1

You have PM.

GlenAnderson wrote:What are the forks like mate? Just the stanchions and sliders, I wouldn't need the yokes. Got to do my fork seals on mine, and the stanchions are pretty badly pitted, so looking for a pair to strip and rebuild ready to do a quick swap over, rather than have my bike in bits for ages...

Cheers, Glen.

The forks are in a pretty sorry state, they are heavily pitted and the caps look like they have been serviced by an Orangutang.
If they are handy for you as spares or to do whilst yours is still on the road  £30 + postage

A few other bits and pieces that may be useful.
A set of coils and leads/caps  £15


A right hand grab rail/ indicator mount   £10


Regulator/Rectifier  £15

A set of engine mounting bolts, strangely enough the front one didn't need to be cut out  £10     *****SOLD****

Right hand switchgear  £15


Cooling fan assembly, needs new ring connector for earth wire.(in fact I'll put one on) £20    ****SOLD****



Again all prices + postage or can be collected from Windsor area.

You wouldn't happen to have a stainless set of headers by any chance that you don't need. I live in hope, cheers

skyerae wrote:You wouldn't happen to have a stainless set of headers by any chance that you don't need. I live in hope, cheers

Unfortunately not, I'm after a set myself. In fact 2 sets

I'm interested in the cooling fan assembly and engine mounting bolts if they're not already gone.

Jameshambleton wrote:I'm interested in the cooling fan assembly and engine mounting bolts if they're not already gone.

You have PM James.

Do you have a clutch perch (the bit that holds the clutch lever to the bar and has  the mirror mounted on it) available?

Do you have a set of mirrors?

eternally_troubled wrote:Do you have a clutch perch (the bit that holds the clutch lever to the bar and has  the mirror mounted on it) available?

Do you have a set of mirrors?

Mirrors I don't have.
The clutch perch is £18 posted.   ****SOLD****

A few more bits,
Front mudguard in ABS solid with no damage but needs painting £15****SOLD****




Right hand radiator cowl in green, good condition £20****SOLD****



Prices are + postage or collected from Windsor area.

Hi do you have the drum brake swing arm??

I do indeed, I'll give it a clean and get a picture up for you tomorrow

Swingarm for drum model, comes with rear spindle/spacers/chain tensioners   £35            *****SOLD*****





Petrol tank, decent condition considering it's age. Two small dings as shown in pictures. fuel tap and fuel cap are not included.
Collection preferred due to size and cost, but could post if necessary.   £100****SOLD****







Prices are +postage, or can collect from the Windsor area.

ANDYC wrote:

eternally_troubled wrote:Do you have a clutch perch (the bit that holds the clutch lever to the bar and has  the mirror mounted on it) available?

Do you have a set of mirrors?

Mirrors I don't have.
The clutch perch is £18 posted.

I'll have that! You have a PM...

eternally_troubled wrote:

ANDYC wrote:

eternally_troubled wrote:Do you have a clutch perch (the bit that holds the clutch lever to the bar and has  the mirror mounted on it) available?

Do you have a set of mirrors?

Mirrors I don't have.
The clutch perch is £18 posted.

I'll have that!  You have a PM...

Replied

Right hand(or foot in this case) for the drum brake model  £35 + postage   ****SOLD****

do you have rear wheel spacers for a drum model. Would the swingarm still be available. I am also after a set of rear shockers if you have any as mine have puked their oil out.

Are those forks still available? Don't mind the pitting etc as can sort that if they are straight?

mattg wrote:Are those forks still available? Don't mind the pitting etc as can sort that if they are straight?

Yes they're still available. I assumed they are straight as it rode true, but I will check with a straight edge to be certain.

ANDYC wrote:

mattg wrote:Are those forks still available? Don't mind the pitting etc as can sort that if they are straight?

Yes they're still available. I assumed they are straight as it rode true, but I will check with a straight edge to be certain.

Thanks bud. If straight, I'll take them. Was rebuilding the ones on my track CB last night and found my stanchions were kinked.