air/ fuel screw adjustment right hand carb
3 posters
CB500 Club forum :: Forum :: Workshop :: Upgrades
Page 1 of 1
air/ fuel screw adjustment right hand carb
Can anyone tell me how to adjust the air screw or fuel metering screw on the right hand carb as the hose is in the way and i can not even get a small driver in ?, the left hand carb is easy to get to regards J
ar1- Barry Sheene
- Posts : 82
Re: air/ fuel screw adjustment right hand carb
You can buy long reach carb adjusting screwdrivers, which have a 90 degree bend on them. That could work
sullivj- the 900
- Posts : 2246
Location : Gatwick
Re: air/ fuel screw adjustment right hand carb
cheers thanks for that, but have solve the problem, length of small bore rubber pipe like the one from the carb to the fuel tap vacuum and insert a 6mm hex shaft screw driver bit in to it, works a treat regards J
ar1- Barry Sheene
- Posts : 82
Re: air/ fuel screw adjustment right hand carb
Hi,
The rubber hose and screw driver bit was a good tip, adjusted my carb with same method. You get more freeplay to coolant hose when you remove the hook shape part that locates hose to cylinder.
BR,
Antti
The rubber hose and screw driver bit was a good tip, adjusted my carb with same method. You get more freeplay to coolant hose when you remove the hook shape part that locates hose to cylinder.
BR,
Antti
Melitos- Silver Bullet
- Posts : 101
Location : Vaasa
Similar topics
» idle mix screw adjustment
» pilot screw and carb sync
» Carb idle screw stuck
» twin carb pilot screw thread size
» tweet air / fuel intake screw to stop stalling
» pilot screw and carb sync
» Carb idle screw stuck
» twin carb pilot screw thread size
» tweet air / fuel intake screw to stop stalling
CB500 Club forum :: Forum :: Workshop :: Upgrades
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum