PortalYes I do £20 for the pair, plus postage.
+13
smokingsig
wrighty
Crashtel
ojacobs1
Moose85
garddun
Crash- Elmit
dipstick
skyerae
Cult classic ad
Jameshambleton
tt fan
Lowsie
17 posters
Naked cb500 ready to strip.
ANDYC- the 900
Posts : 1300
Location : Windsor
ojacobs1- Scratcher!
- Posts : 25
Location : Skien, Norway
Great:D. Do you have the bolts for them too? And can you send them to Norway? 3746 Skien, TelemarkANDYC wrote:Yes I do £20 for the pair, plus postage.
ANDYC- the 900
Posts : 1300
Location : Windsor
Posting to you shouldn't be a problem, I'll try to find them so I can get an accurate cost for you.
ojacobs1- Scratcher!
- Posts : 25
Location : Skien, Norway
ANDYC wrote:Posting to you shouldn't be a problem, I'll try to find them so I can get an accurate cost for you.
Thanks
ANDYC- the 900
Posts : 1300
Location : Windsor
Well the good news is that, I have found them and yes I probably have a set of bolts for them as well.
The downside is the postage to you in Norway is very expensive at £30.
The downside is the postage to you in Norway is very expensive at £30.
ojacobs1- Scratcher!
- Posts : 25
Location : Skien, Norway
ANDYC wrote:Well the good news is that, I have found them and yes I probably have a set of bolts for them as well.
The downside is the postage to you in Norway is very expensive at £30.
That was what I thought...
But not easy to get hold of these here either so I need you to send them anyway. Do you do paypal?
ANDYC- the 900
Posts : 1300
Location : Windsor
ojacobs1 wrote:ANDYC wrote:Well the good news is that, I have found them and yes I probably have a set of bolts for them as well.
The downside is the postage to you in Norway is very expensive at £30.
That was what I thought...
You have PM.
Crashtel- Squiddy
- Posts : 15
Location : Berkshire
- Post n°58
I'm a bit late to the party but would you have a bar end available that looks like this? thanks T
by Crashtel Mon 09 Sep 2019, 9:58 am
ANDYC- the 900
Posts : 1300
Location : Windsor
I'll have a look when I get home.
ANDYC- the 900
Posts : 1300
Location : Windsor
Sorry nothing available.
Crashtel- Squiddy
- Posts : 15
Location : Berkshire
Thanks for looking TANDYC wrote:Sorry nothing available.
wrighty- Running out of unique names
- Posts : 179
Location : Market Deeping Lincs
Is this any good for you? Don't want anything for it, just cover my postage. PM me if you want it.
Crashtel- Squiddy
- Posts : 15
Location : Berkshire
many thanks you should have a PM. Ta T
Crashtel- Squiddy
- Posts : 15
Location : Berkshire
Long shot on this old post but if you still have old bit of Cb500, I'm after a Brembo front master cylinder for my cb500 W 1999. unfortunately the top screws have sheered. Ta Terry
ANDYC- the 900
Posts : 1300
Location : Windsor
I'll take a look tomorrow Terry.
ANDYC- the 900
Posts : 1300
Location : Windsor
Unfortunately no brembo master cylinder Terry.
Crashtel- Squiddy
- Posts : 15
Location : Berkshire
Many thanks for looking. Ta T
joe mc donald- Running out of unique names
- Posts : 181
ANDYC
Did you look at the other forks or do you have any. I could pick up as only in Burnham.
Regards
Joe.
Did you look at the other forks or do you have any. I could pick up as only in Burnham.
Regards
Joe.
ANDYC- the 900
Posts : 1300
Location : Windsor
Hi Joe, unfortunately not. The only forks I have left need new stanchions to be of any use.
smokingsig- Barry Sheene
- Posts : 74
You happen to have nr 5 ? Radiator cover ?
ANDYC- the 900
Posts : 1300
Location : Windsor
Hi, yes I do have one, £10 +postage
smokingsig- Barry Sheene
- Posts : 74
ANDYC wrote:Hi, yes I do have one, £10 +postage
How much is that in € + shipping to Belgium ?
ANDYC- the 900
Posts : 1300
Location : Windsor
I'll check.
smokingsig- Barry Sheene
- Posts : 74
ANDYC wrote:I'll check.
Thx. If your not up to it just let me know then I'll find another solution.
smokingsig- Barry Sheene
- Posts : 74
Nevermind, I'm making my own out of an aluminium sheet
