CB500 Club forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.
You don’t stop riding because you’re getting old, but you get old when you stop riding.

[solved]Caliper piston seals

2 posters

CB500 Club forum :: Forum :: Workshop

Go down

Solved [solved]Caliper piston seals

Post by Guest Wed 10 Dec 2014, 6:30 pm

Does it matter for a Nissin caliper which way the seals go in? I.e. do they have a direction of insertion? Thanks
avatar
Guest
Guest


Back to top Go down

Solved Re: [solved]Caliper piston seals

Post by Celt500 Wed 10 Dec 2014, 11:35 pm

There is a right way up.
There's a helpful couple of videos here: 



Celt500
Celt500
Mothra the Radioactive
Mothra the Radioactive

Posts : 227

Back to top Go down

Solved Re: [solved]Caliper piston seals

Post by badseeds Thu 11 Dec 2014, 10:27 pm

No. There's two different sizes, but they don't have a 'right way' up. My genuine Honda ones didn't, anyway.
badseeds
badseeds
the 900
the 900

Awesome!
Posts : 1795
Location : Beccles, Suffolk

Back to top Go down

Solved Check

Post by Guest Thu 11 Dec 2014, 10:48 pm

Tried both ways and couldn't feel any difference at all. Will let you know if anything goes leaking...
avatar
Guest
Guest


Back to top Go down

Solved Re: [solved]Caliper piston seals

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

CB500 Club forum :: Forum :: Workshop

 
Permissions in this forum:
You cannot reply to topics in this forum