the images in the Haines manual are so vague. It says "fill the system, see illustration". Here is it - it doesn't look like the standard coolant cap on the right side of the vehicle.
Here's the image:
Much appreciated
wornsprokets wrote:Expansion tank.. in yellow circle
I wouldn't worry about over filling the expansion tank, as any surplus just vents out on to the road when the engine heats up. As long as you have topped up the header tank and there is some coolant visible in the overflow when the bike is cold, it'll be fine.TheWizardofOdds wrote:wornsprokets wrote:Expansion tank.. in yellow circle
Damn thing, mine is clean but cannot read level at all. I know there's coolant in there but hard to get the upper level right.
Brilliant, thanks. Sorry stupid question, but is the expansion the overflow?Beresford wrote:I wouldn't worry about over filling the expansion tank, as any surplus just vents out on to the road when the engine heats up. As long as you have topped up the header tank and there is some coolant visible in the overflow when the bike is cold, it'll be fine.TheWizardofOdds wrote:wornsprokets wrote:Expansion tank.. in yellow circle
Damn thing, mine is clean but cannot read level at all. I know there's coolant in there but hard to get the upper level right.
|
|
Hi Guest!
You have posted 0 times since your registration on
The last registered user was https://cb500.forumotion.com/u3324. Say Hi
Quicklinks